Author Topic: ext3-boot on 1.02.08  (Read 22938 times)

May 22, 2009, 09:08:01 AM
Read 22938 times

c0ldsun

  • Newbie

  • Offline
  • *

  • 7
Hi,

Sorry, I hope i didn't missed a thread... when can we expect next ext3-boot on 1.02.08?

  Kudos to zorander.. u rock!!

CU, c0ldsun

May 23, 2009, 07:11:26 AM
Reply #1

rezmus

  • Sr. Member

  • Offline
  • ****

  • 418
seems zorander is on vacations again. i will prepare ext3-boot based on 1.02.08 later today or tomorrow.

May 23, 2009, 08:59:40 AM
Reply #2

mike2k8

  • Full Member

  • Offline
  • ***

  • 100
seems zorander is on vacations again. i will prepare ext3-boot based on 1.02.08 later today or tomorrow.
That would be great. Thank you very much.

May 23, 2009, 09:10:20 AM
Reply #3

Fishbowls

  • Sr. Member

  • Offline
  • ****

  • 371
Thanks rezmus
end-users wiki http://wdtv.wetpaint.com
Custom Firmware wiki http://wiki.wdtv.org/doku.php
mediainfo http://mediainfo.sourceforge.net
start here http://wdtvforum.com/main/index.php?topic=1088.msg7613#ms
wdtv+ext3-boot-9.2+sabrent gbit adapter+
rss/weather+disco-webserver. this thing is cool eh.

May 23, 2009, 10:46:21 AM
Reply #4

Pennhaven

  • Full Member

  • Offline
  • ***

  • 138
i will prepare ext3-boot based on 1.02.08 later today or tomorrow.

That's great, except if it doesn't work with USB hubs, as has been reported, I'm going to pass on this rev.

Has anybody reported that 1.02.08 works on any USB hub?

May 23, 2009, 01:29:55 PM
Reply #5

El`Drako

  • Newbie

  • Offline
  • *

  • 31
Rezmus, many many thanks!  :)

Pennhaven
HDD is working over a USB-hub, but the UI show only the first connected device. (tested passive usb-hub with 4 ports)

May 24, 2009, 03:47:39 AM
Reply #6

rezmus

  • Sr. Member

  • Offline
  • ****

  • 418
here it is:

http://www.mediafire.com/?q2tdtqy2md2

i;ve put 1.02.08 bins in, also included missing browse list lightbar and patched dmaosd for more font sizes.

like some of u noticed there is a prob with usb hubs. i have usb hub with two devices - pendrive and lan card. it works ok, but if u connect 2 or more storage devices (pendrive, hdd) to the same usb hub fw mount only one of them. i think it can be fixed by devs without waiting for wdc, coz i can still manualy mount more devices connected to hub without prob. maybe i will take a look on it later (haven;t look much on mounting scripts so far).

May 24, 2009, 03:59:44 AM
Reply #7

Fishbowls

  • Sr. Member

  • Offline
  • ****

  • 371
awesome rezmus.
thanks for putting it together
and the little fix's.
end-users wiki http://wdtv.wetpaint.com
Custom Firmware wiki http://wiki.wdtv.org/doku.php
mediainfo http://mediainfo.sourceforge.net
start here http://wdtvforum.com/main/index.php?topic=1088.msg7613#ms
wdtv+ext3-boot-9.2+sabrent gbit adapter+
rss/weather+disco-webserver. this thing is cool eh.

May 24, 2009, 04:52:23 AM
Reply #8

sebastiaan15

  • Newbie

  • Offline
  • *

  • 38
used it

can't see my network and appletrailers

use the old 1.02.07 ext3 an all files work see all files

May 24, 2009, 05:18:31 AM
Reply #9

rezmus

  • Sr. Member

  • Offline
  • ****

  • 418
this might be general mounting problem caused by 1.02.08 bins, not only usb hub problem. i will take a look on it later today.

May 24, 2009, 10:20:54 AM
Reply #10

c0ldsun

  • Newbie

  • Offline
  • *

  • 7
Great work.
Many thanks, rezmus  :)

Cu, coldsun

May 24, 2009, 10:46:59 AM
Reply #11

Pennhaven

  • Full Member

  • Offline
  • ***

  • 138
here it is:
...
like some of u noticed there is a prob with usb hubs. i have usb hub with two devices - pendrive and lan card. it works ok, but if u connect 2 or more storage devices (pendrive, hdd) to the same usb hub fw mount only one of them. i think it can be fixed by devs without waiting for wdc, coz i can still manualy mount more devices connected to hub without prob. maybe i will take a look on it later ...

Your configuration mirrors mine. So I should have no problem mounting NAS share over the hub with flash ext3-boot drive on same hub. Good news. Thanks !

May 24, 2009, 11:35:26 AM
Reply #12

rezmus

  • Sr. Member

  • Offline
  • ****

  • 418
i didn;t had much time for tests but i saw that when i have 2 storage devices in the hub only one of them gets mounted under /tmp/media/, also my 3rd ext3 device on other usb port (without hub) gets mounted only in one location, and if i put only 1 storage device to hub, ext3 device on other usb port is mounted on 4 locations like it was always done with 1.02.07. anyway it;s strange why multiple storage devices in hub are not mounted like they should coz all logs say that they are detected.

i will take a look on it again tomorrow.

May 25, 2009, 12:35:15 AM
Reply #13

redindian

  • Hero Member

  • Offline
  • *****

  • 643
    • True Font Family - Any font, any website, any browser
Thanks a lot, going to try this one.

May 25, 2009, 05:33:41 AM
Reply #14

eliafino

  • Full Member

  • Offline
  • ***

  • 101
Sorry but not understand...
... I have an HUB-USB with 4 ports, I connect LAN-Adapter, one Lacie 2Tb, one WD 1Tb and one usb pen 4Gb with ext3-boot firmware.

I see all disks.