Author Topic: Newbie needs network setup help  (Read 2034 times)

March 27, 2011, 09:03:54 PM
Read 2034 times

tibimakai

  • Newbie

  • Offline
  • *

  • 10
Hi to everybody.
I have  tried the b-rad firmware all went smooth, but could not setup the wireless side and went with that russian firmware which picked up right away my wireless adapter , I have all the IP and the rest of addresses  and I can browse the media player from my pc, but I'm having issue with backwards communication. can't see my pc on the screen of the wdtv. media library it's off.
I don't know nothing about how to setup the net mounts or what these server abreviations mean, so I need all the help I can get.
if it can't be done I will give another try to b-rads firmware after I'm getting the Dlink DW 140's adapter I have just ordered.
here is my net mounts folder:

#!/bin/sh

####################################################################
### Network mounts script file for WDTV G2 with extended firmware
####################################################################
### Note: Place this file to dir '.wd_tv.boot' on USB drive or
### upload via FTP access to WDTV permanent area /conf (/tmp/conf)
### and full reboot WDTV device.
####################################################################

####################################################################
### Mount SMB shares from Windows or Samba servers (slow)
### Usage:
### mount-smb "MountName" "//ipaddr\ShareName"
### mount-smb "MountLi" "//ipaddr\MediaLib" "user=xxx,pass=xxx"
####################################################################

### Example
#mount-smb "Public" "//192.168.0.100\Common"
#mount-smb "MediaL" "//192.168.0.100\MediaLib" "user=Dude,pass=SuperDuper"

####################################################################
### Mount NFS shares from NFS servers (best transfer speed)
### Usage:
### mount-nfs "MountName" "ipaddr:/unixsharepath"
### mount-nfs "MountName" "ipaddr:/unixsharepath" "tcp,soft"
####################################################################

### Example
#mount-nfs "Media1" "192.168.0.101:/mnt/medialib1"
#mount-nfs "Media2" "192.168.5.140:/mnt/medialib2" "tcp,soft"

####################################################################
### Mount FTP shares from remote FTP servers
### Usage:
### mount-ftp "MountName" "ftp://ipaddr[:port]/path"
### mount-ftp "MountName" "ftp://ipaddr[:port]/path" "user=MyUser:MyPass"
####################################################################

### Example
#mount-ftp "Audio" "ftp://ftp.my.server/../../" "user=Dude:SuperDuper"
#mount-ftp "Music" "ftp://ftp.my.server:21/pub/music/"

March 29, 2011, 09:13:18 PM
Reply #1

tibimakai

  • Newbie

  • Offline
  • *

  • 10
nobody is using Padavan's firmware on this forum?