Author Topic: help me please  (Read 3396 times)

January 04, 2011, 01:10:55 PM
Read 3396 times

reza

  • Newbie

  • Offline
  • *

  • 2
i have a wdhd tv g2 with the new firmware 1.01.77-WDLXTV-G2-0.4.5.3 [flash] working good but moviesheets not working
  this is the S00 custom

#!/bin/sh
##
## in this file you can enter commands that will be executed with the init.d scripts
## typos / syntax errors will prevent the osd from booting
## this file is only executed if it is at the root of an attached device at boot
##  *** NO REFLASH IS REQUIRED: S00custom-options is executed EVERY boot ***
##
## several examples are provided below, uncomment (delete #) them to use
##
##
## config_tool commands only need to be executed _once_ then they can be re-commented
## ***NOTE*** commenting a config_tool command does *NOT* disable it
##            you must change a setting back to default manually
##
##
##


## change background image between 3 stock options, or arbitrary location
## background image **CAN NOT** be larger than 512KB
##
## the following three images are included in the firmware
## original background:
#config_tool -c BACKGROUND_IMAGE=original_bg.jpg
## eM82's backdrop background:
#config_tool -c BACKGROUND_IMAGE=eM82_bg.jpg
## wood panel (default) background:
#config_tool -c BACKGROUND_IMAGE=villa_bg.jpg
##
## To set an absolute location:
#config_tool -c BACKGROUND_IMAGE=/tmp/mnt/123ed956-1256-4825-9e79-86fc1e0febaa/random/location.jpg
##
## You can also supply an image, on an attached device at boot (like S00custom-options),
## which is 1280x720 and *NO* larger than 512KB named villa_bg.jpg and it will be used as the custom background
## *ONLY* villa_bg.jpg will work in this method, and *you may remove the device if you desire* after the background has been loaded
##


## change screen saver image between wdlxtv & original WD logo's, or arbitrary location
##
## wdlxtv logo
#config_tool -c SCREEN_SAVER_IMAGE=screen_saver.png
## original WD logo
#config_tool -c SCREEN_SAVER_IMAGE=screen_saver.orig.png
## some random location (absolute)
#config_tool -c SCREEN_SAVER_IMAGE=/tmp/mnt/123ed956-1256-4825-9e79-86fc1e0febaa/some/random/screensaver-image.png
##
## You can also supply an image, on an attached device at boot (like S00custom-options),
## which is *NO* larger than 512KB named screen_saver.png and it will be used as the custom screen saver image
## *ONLY* screen_saver.png will work in this method, and *you may remove the device if you desire* after screen_saver.png has been loaded
##


## Movie sheet modes (only one can be enabled at a time)
## unless you have sheets for each mode you will encounter oddities switching around modes
## AKA this isn't magic
##   Full screen std mode:
#config_tool -c MSHEETMODE=std
##   1280x460 (horizontal banner at top) sheet mode:
#config_tool -c MSHEETMODE=sheet
##   500x720 (vertical banner on right) wall mode:
#config_tool -c MSHEETMODE=wall

## turn on moviesheets for a list type  (ON)
## you must turn it on for a view type to see sheets!
##   video thumb mode
#config_tool -c VIDMSHEET=ON
##   audio/photo thumb mode
#config_tool -c GENMSHEET=ON
##   list mode (video/audio/photo)
#config_tool -c LISTMSHEET=ON

## enable a central moviesheet repository
## allows all moviesheets to exist in one location
#config_tool -c MSHEETDIR=/tmp/media/usb/someWhere


## enable auto framerate/resolution functionality
#### keeps OSD at menu selected resolution,
#### but changes to suit every viewed video
#### also downmixes multi-channel AAC -> stereo, so that it plays on the wdtv
## to customize settings edit /conf/autores.conf
#config_tool -c AUTORES=ON

## enable forced-HDMI resolutions instead of highest compatible EDID
#### this setting is for displays who have bad EDID
#### or whose display has hidden resolutions not in the EDID
## **** this setting should not be dangerous, but still be careful ****
#config_tool -c FORCEHDMI=ON


## enable auto-zoom overscan fix
#### this setting zooms out automatically the  
#### number of times below, when videos are played
#config_tool -c DEFAULT_ZOOM=1


## change list view to 4/6/8/11 entries
#config_tool -c LISTNUM=4
#config_tool -c LISTNUM=6
#config_tool -c LISTNUM=8
#config_tool -c LISTNUM=10   (default)
#config_tool -c LISTNUM=11
#config_tool -c LISTNUM=12


## change video thumb view to various amounts of thumbs
#THUMBRESO=120x160 has been removed due to OSD crashing issues
#config_tool -c THUMBRESO=150x200   # 12
#config_tool -c THUMBRESO=163x245   # 8   (default)
#config_tool -c THUMBRESO=180x240   # 10
#config_tool -c THUMBRESO=225x300   # 4
#config_tool -c THUMBRESO=240x360   # 4


## change music/photo thumb view to 10/15 thumbs
#config_tool -c GENTHUMBS=10      # 10  
#config_tool -c GENTHUMBS=15      # 15   (default)


## change video info overlay
## ( for subtitle viewing during pause/timing/etc)
## requires reboot after change
## upper ~60%
#config_tool -c VIDEO_INFO_BAR=2
## top (warning: options bar covers up info overlay with setting 3)
#config_tool -c VIDEO_INFO_BAR=3


## change subtitle size to one not menu-selectable
#config_tool -c SUBTITLE_FONT_SIZE=44
#config_tool -c SUBTITLE_FONT_SIZE=48
#config_tool -c SUBTITLE_FONT_SIZE=50
#config_tool -c SUBTITLE_FONT_SIZE=52
#config_tool -c SUBTITLE_FONT_SIZE=56
#config_tool -c SUBTITLE_FONT_SIZE=60
#config_tool -c SUBTITLE_FONT_SIZE=64
#config_tool -c SUBTITLE_FONT_SIZE=68
#config_tool -c SUBTITLE_FONT_SIZE=72
#config_tool -c SUBTITLE_FONT_SIZE=76
#config_tool -c SUBTITLE_FONT_SIZE=80


## permanently set timezone
## http://www.timeanddate.com/library/abbreviations/timezones/
## below is for Pacific North America
#config_tool -c TIMEZONE=PST8PDT


## permanently set hostname
#config_tool -c DEVICE_NAME=SomeHostName


## use custom USB slot icons (default: ON)
#config_tool -c USBICONS='OFF'


## disable telnet server (default: ON)
#config_tool -c TELNETD=OFF


## set custon telnet server port (default: 23)
#config_tool -c TELNETPORT=49532


## disable pure-ftpd server (default: ON)
#config_tool -c FTPD=OFF


## disable dropbear ssh server (default: ON)
#config_tool -c SSHD=OFF


## set custon dropbear ssh server port (default: 22)
#config_tool -c SSHPORT=62356


## disable keep alive of ethernet during WDTV Live standby
#config_tool -c DISABLE_ETHERNET_ON_STANDBY=YES


## delay net.mounts execution in case of wireless adapter usage and shares not showing up
#config_tool -c NET_MOUNTS_DELAY=30


## automagic IP obtain at boot (default: OFF)
## required for NTP=ON
#config_tool -c IPUP=OFF

## enable NTP - network time (default: OFF)
## *** NTP requires IPUP=ON ***
#### *** ONLY with wireless: NTP adds ~20s to the initial boot of the device ***
#### *** due to the bringing up and acquisition of wireless network address  ***
## -- if NTP fails because of slow address acquire you can increase delay to NTP_DELAY
#config_tool -c NTP=ON

## custom NTP server
#config_tool -c NTPSERVER=pool.ntp.org

## NTP delay is seconds (in case of slow wireless adapter)
#config_tool -c NTP_DELAY=0


## Disable online-delayer (in case of stalled network detection)
## or because nzbget / rtorrent / net.mounts / etc won't execute
#config_tool -c ONLINEDELAYER=OFF


## power actions are executed when the OSD is suspended/resumed
## ***NOT*** executed when your wdtv live comes on from cold boot / power cycle
## executed when:
## -----the wdtv live goes into standby via remote
## -----the wdtv live wakes up from suspend via remote
## --use S00custom-options or S00user-script for actions that happen at boot
## *** DO NOT EXECUTE usb.power.on OR usb.power.off IN ETHERNET ACTIONS *** SEE USB_POWER_OFF setting ***
## [you may have number actions which are executed in order]
##
#config_tool -c POWER_UP_ACTION='logger -t "power_up_action" "I am doing something"'
#config_tool -c POWER_UP_ACTION20='sleep 5; ether-wake -b xx:xx:xx:xx:xx:xx; sleep 10; /etc/init.d/S90net.mounts start'
#config_tool -c POWER_DOWN_ACTION='logger -t "power_down_action" "the OSD has been suspended!"'


## Enable/Disable Samba Windows share server (default: OFF)
## ON:
#config_tool -c ENABLE_SAMBA_SHARE=1
## OFF:
#config_tool -c ENABLE_SAMBA_SHARE=0

## Change SMB resolve order to 'proper' order
##  YMMV
## this MUST contain either valid settings or be blank
## stock/official firmware order:
#config_tool -c SMB_RESOLVEORDER='bcast lmhosts wins host'
## proper/corrected order:
#config_tool -c SMB_RESOLVEORDER='lmhosts host wins bcast'
## fixes missing / non-working network shares (bad DNS):
#config_tool -c SMB_RESOLVEORDER='lmhosts wins bcast'

## Change Samba share export to not allow guest (anonymous) mounting
## smbpasswd is stored in /conf
#### This setting requires a reboot if executed manually (telnet/ssh instead of S00 script)
##
#config_tool -c SAMBA_SERVER_PROTECTION_STATE=1
#config_tool -c SYSTEM_USERNAME='SambaUser'
#config_tool -c SYSTEM_PASSWORD='SambaUser'
#config_tool -c SMBSHARE_USERNAME='SambaUser'
#config_tool -c SMBSHARE_PASSWORD='SambaUser'

## Enable guest read only access, plus user protected write access
#### This setting makes no sense without the settings above set
##
#config_tool -c SAMBA_PROTECTION_WITH_GUEST=1

## Disable/enable Samba exported shares on standby (default: ON)
#config_tool -c SMB_STANDBY=OFF

## Disable/enable Samba auto export mode (default: ON)
#config_tool -c SMBD_AUTO=OFF

## set Samba Workgroup
#config_tool -c SAMBA_WORKGROUP=SomeWorkgroup


## Enable NFSD kernel NFS server (default: OFF)
#config_tool -c NFSD=ON

## Enable NFSD auto export mode (default: OFF)
## (requires NFSD_AUTO_DEFAULT)
## (overrides /conf/exports)
#config_tool -c NFSD_AUTO=ON

## NFSD auto export mode default setting
#config_tool -c NFSD_AUTO_DEFAULT='192.168.0.234(rw,async,no_subtree_check) 192.168.0.199(rw,async,no_subtree_check)'


## turns off 5V to USB Bus on standby (when you press power off on remote)
## this action is prevented by the following:
##  - root.bin active
##  - OSD Theme active
##  - Optware active
##  - app.bin active
##  - Deluge or NZBget enabled
#config_tool -c USB_POWER_OFF=1


## Select one of the extra translations, that is not selectable from the language options
## Only possible to set ONE locale
## Choices:
## - Netherlands: nl
## - Greece: gr
## - Catalan: ca
## - Hungarian: hu
## - Slovakian: sl
## - Polish: pl
#config_tool -c LOCALE=nl
#config_tool -c LOCALE=gr
#config_tool -c LOCALE=ca
#config_tool -c LOCALE=hu
#config_tool -c LOCALE=sl
#config_tool -c LOCALE=pl


## enable YouTube Switcher (You can only use one at a time!)
## to enable YouTube HD:
## *** youtubeHD requires setting YOUTUBE_QUALITY too ***
#config_tool -c YOUTUBE_SWITCHER=youtubeHD
## to enable EasyNews XViD proxy:
#config_tool -c YOUTUBE_SWITCHER=easynews
## to disable YouTube Switcher:
#config_tool -c YOUTUBE_SWITCHER=''

## EasyNews YouTube Switcher settings
#config_tool -c EASYNEWS_USER=user
#config_tool -c EASYNEWS_PASSWORD=password


## youtubeHD YouTube Switcher quality setting
#config_tool -c YOUTUBE_QUALITY=270P
#config_tool -c YOUTUBE_QUALITY=360P
#config_tool -c YOUTUBE_QUALITY=480P
#config_tool -c YOUTUBE_QUALITY=720P
#config_tool -c YOUTUBE_QUALITY=1080P


## Live365 Switcher (You can only use one at a time!)
## to enable Shoutcast
#config_tool -c LIVE365_SWITCHER=shoutcast
## go back to live365
#config_tool -c LIVE365_SWITCHER=''


## EIRI (remote control remapping & action)
## requires /conf/eiri.conf or eiri.conf on device at boot
#config_tool -c EIRI=ON


## WDTVExt internal plugin debug level
## 0 : logging disabled (default)
## 1-5 : higher levels of output (1 least -> 5 most)
#config_tool -c MOVIESHEET_DEBUG=5
#config_tool -c RELOADER_DEBUG=5


## WDLXTV Census - registers your device with fwup.wdlxtv.com
## **** 100% optional ****
##  *** default: OFF ***
#config_tool -c WDLXTV_CENSUS=ON


## extra NLS / codepage packages (for non-english character filesystems)
##
## NLS packages (default utf8)
#config_tool -c IOCHARSET=utf8
#config_tool -c IOCHARSET=ascii
#config_tool -c IOCHARSET=euc-jp
#config_tool -c IOCHARSET=iso8859-13
#config_tool -c IOCHARSET=iso8859-14
#config_tool -c IOCHARSET=iso8859-15
#config_tool -c IOCHARSET=iso8859-2
#config_tool -c IOCHARSET=iso8859-3
#config_tool -c IOCHARSET=iso8859-4
#config_tool -c IOCHARSET=iso8859-5
#config_tool -c IOCHARSET=iso8859-6
#config_tool -c IOCHARSET=iso8859-7
#config_tool -c IOCHARSET=iso8859-9
#config_tool -c IOCHARSET=koi8-r
#config_tool -c IOCHARSET=koi8-ru
#config_tool -c IOCHARSET=koi8-u

## codepage packages (default cp437)
#config_tool -c CODEPAGE=cp1250
#config_tool -c CODEPAGE=cp1251
#config_tool -c CODEPAGE=cp1255
#config_tool -c CODEPAGE=cp437
#config_tool -c CODEPAGE=cp737
#config_tool -c CODEPAGE=cp775
#config_tool -c CODEPAGE=cp850
#config_tool -c CODEPAGE=cp852
#config_tool -c CODEPAGE=cp855
#config_tool -c CODEPAGE=cp857
#config_tool -c CODEPAGE=cp860
#config_tool -c CODEPAGE=cp861
#config_tool -c CODEPAGE=cp862
#config_tool -c CODEPAGE=cp863
#config_tool -c CODEPAGE=cp864
#config_tool -c CODEPAGE=cp865
#config_tool -c CODEPAGE=cp866
#config_tool -c CODEPAGE=cp869
#config_tool -c CODEPAGE=cp874
#config_tool -c CODEPAGE=cp932
#config_tool -c CODEPAGE=cp936
#config_tool -c CODEPAGE=cp949
#config_tool -c CODEPAGE=cp950

#config_tool -c SHOW_FILESIZE_SETTING=0
#config_tool -c MSHEETMODE=sheet
#config_tool -c VIDMSHEET=ON
#config_tool -c GENMSHEET=ON
#config_tool -c LISTMSHEET=ON

i add the last 4 lines
 and the flash the wdtv box
still no movie sheet

thumbgem file size 250000

main sheet    M\$N$E_sheet.sheet.jpg
extra sheet   $M\$N$E_sheet.sheet.jpg
folder    $M\folder.jpg
parent folder sheet  $M\..\$P_sheet.jpg
metadata sheet  $M\$N$E.tgmd


here is what i find in my folder

Hancock.jpg
folder.jpg
Hancock.mkv
Hancock.mkv.tgmd
Hancock.nfo
Hancock.mkv_sheet.sheet.jpg
that what i find in the folder
  

any hepl is appreciated  thanks

April 12, 2011, 03:56:26 AM
Reply #1

RFPAIVA

  • Newbie

  • Offline
  • *

  • 4
hello!
I need your help, I upgraded my WDTV with the new-firmwere 1:02:21 WDLXTV-Live-0.4.7.3 after installing correctly found that after activating the menu sheets these same menus do not appear in my WDTV.
 Within each folder of the movie I have these files:
 - 007 - Casino.Royale_sheet
 - background
 - Casino.Royale.2006.BluRay.1080p.DTS.x264.dxva
 - Casino.Royale.2006.BluRay.1080p.DTS.x264.dxva
 - Casino.Royale.2006.BluRay.1080p.DTS.x264.dxva.mkv.tgmd
 - Casino.Royale.2006.BluRay.1080p.DTS.x264.dxva.mkv_sheet
 - Casino.Royale.2006.BluRay.1080p.DTS.x264.dxva.srt
 - fanart.tvixie
 - brochure
 - front_cover.tvixie
 - icon.tvix
 - MovieInfo.tvixie

 Is he all right, or a missing file?

 MC

 Rui Paiva