Author Topic: WD TV - WDBABG0000NBK and HDMI output  (Read 2640 times)

December 29, 2009, 01:00:05 PM
Read 2640 times


  • Newbie

  • Offline
  • *

  • 1
I'm trying to connect my WD TV player with the FullHD TV set by HDMI cable. Everything is ok  when I connect WD TV by composite, but when I plug HDMI cable i see only strange artefacts. What's going on? I tried use HDMI 1.3 and 1.2 cables even another FullHD Tv set.

January 20, 2010, 01:31:45 AM
Reply #1


  • Newbie

  • Offline
  • *

  • 1
Dear All,
I have also problem with HDMI visualization (
I can correctly see the WD logo on boot. After that, the box switches to the composite output.
If I try to "force" HDMI output with various resolutions/frequencies I see a black image or an image like the photo.

Can you help me?

- the firmware is the latest
- the hdmi cable works fine with other devices
- I cut-off 2 mm of plastic around the plug to fit in the hdmi hole better as someone suggests

Thank you!

ciao simone
« Last Edit: January 21, 2010, 01:32:08 AM by magoafono »

January 20, 2010, 07:48:44 PM
Reply #2


  • Newbie

  • Offline
  • *

  • 18

subtitles works fine.
propaply you've lost .idx file...