Author Topic: BUG v1.01.11 - can not set static ip with more than two digits  (Read 1316 times)

December 15, 2009, 07:56:08 AM
Read 1316 times

allow

  • Newbie

  • Offline
  • *

  • 4
When i try to set a static ip adress in network config, i can not set an ip with more than two digits.

Example:
192.168.118.99 works fine
192.168.118.100 does not work (says adress is not valid)

i believe this is an interface bug and may also happen with gateway or dns (did not test)...also exists in b-rad firmware (as it is based on 1.01.11)
« Last Edit: December 17, 2009, 10:11:38 AM by allow »

December 17, 2009, 08:55:29 AM
Reply #1

Goul

  • Newbie

  • Offline
  • *

  • 15

December 17, 2009, 10:12:43 AM
Reply #2

allow

  • Newbie

  • Offline
  • *

  • 4
the 192.16.xx was a typo...i corredcted the post...and yes i tested several times...problem also exist in other dialoges (dns, gateway, etc.)

December 29, 2009, 12:36:41 PM
Reply #3

rorschach

  • Newbie

  • Offline
  • *

  • 24
Strange, I'm on 1.01.11 and have my unit's IP set to 150 with no problems.